Timber is an organically produced product and hence timber flooring is a naturally available flooring option. Timber flooring is also known as wooden or hardwood flooring. Timber Flooring In Baulkham Hills and other regions around Australia is made with more than one layer of wood. It can vary from two layers to three layers to four layers to even eleven layers. The most commonly available variant is the three-layer timber flooring. There are two categories of timber flooring in Baulkham Hills—unfinished and prefinished. Unfinished timber flooring comes with a rough and natural appearance. It is delivered and the sanding and coating are done on-site. Water-based coatings are used to polish unfinished timber flooring. Prefinished timber flooring comes with finishing on the surface. When it is delivered to the site, there is no need for sanding and coating. In prefinished timber flooring, UV coating is used.
Maintaining timber flooring:
Timber is also used for Sydney flooring. With the timber flooring bearing all the brunt of the day—wet prints, scratches from the paws of the pets, scraping of the chair, mud, and dirt from shoes, it is important to take good care of it. Whether it is Sydney flooring or timber flooring in Baulkham Hill, you need to follow certain basic steps to maintain it.
Here is what you need to do:
- Remove surface dirt: Surface dirt needs to be moved from the floor daily. Whether you sweep it or use a vacuum, you need to do it daily or at least thrice a week.
- Choosing the right cleaning solution: Make sure you ask the manufacturer of the timber flooring in Baulkham Hills his recommendation for a good cleaning solution. You can also use a low pH gentle dishwashing soap and mix it in a bucket of warm water. Ensure to wring out the water from the mop and use it when it is barely damp. If the water gets dirty, change it.
- Upkeeping the floor: If your time flooring has a polyurethane coating, then upkeep is the best thing to do. Using a vacuum cleaner to collect all the dust and then mopping the floor lightly with a damp cloth is the best thing to do. If a sealant is used, it is always recommended to use a dust mop and a vacuum cleaner.
- Using a surface finish: If you want your floor to shine through, then recoating it with a surface finish is one of the best options. It is always advised not to use a furniture spray on the wooden floor.
Rewaxing: If buffing does not bring the shine back, then it is important to rewax it. You may use a cleaner and a paste or use liquid wax specifically made for wooden floors. After application, the floor must be left to dry. After it has dried, you can buff it.
Preventing scratches: The best way to prevent scraping and scratches by the movement of furniture is to place felt pads under them. It is also advised to place doormats at the entrance and in front of the doors.